Quick Tips
- Set valve pin upright, fasten pump hose tightly before inflation.
- Start with dual-action pumping for quick filling.
- Switch to single-action at ~7 PSI to cut fatigue.
- Inflate to recommended 12–15 PSI.
Quick Tips
- Keep fin & fin box clean to prevent damage.
- Install fins after inflating the board.
- Snap fin clip into place to avoid losing the fin.
- Don’t overtighten the screw.
Quick Tips
- When you fall off, water and gravity can push the board away.
- Always attach the leash to the board and your ankle or wrist. It can save your life if you fall unexpectedly.
- Our 10-foot leash features a 7mm TPU cord and SUS swivels. It offers top strength, reliability, and comfort.
Quick Tips
- Keep fin & box clean. Debris causes damage.
- Install fins after inflating the board.
- Insert clip correctly to prevent fin loss.
- Do not overtighten the screw.
Quick Tips
- Set valve pin upright, fasten pump hose tightly before inflation.
- Start with dual-action pumping for quick filling.
- Switch to single-action at ~7 PSI to cut fatigue.
- Inflate to recommended 12–15 PSI.